Anthony Vizzini, Ph.D
OFFICE:
330 Walker Engineering Building
P. O. Box A
Mississippi State, MS 39762

PHONE:
(662) 325.1148

EMAIL:
vizzini@ae.msstate.edu

Anthony J. Vizzini received his PhD in Aeronautics/Astronautics from MIT in 1986 and joined the Aerospace Engineering faculty in the 2003.


Areas of Teaching:

  • Composite Structures
  • Composite Manufacturing
  • Aircraft Structures

Courses Taught:

Undergraduate

  • Composite Materials (EM 4133)

Graduate

  • Composite Materials (EM 6133)

Areas of Research:

  • Integrity of Composite Structures
  • Low-cost Manufacture of Composites

Funding Agencies:

  • Air Force Research Laboratory, Eglin Airforce Base, 2003-present
  • Office of Naval Research, 2002-present
  • Army Research Laboratory, Aberdeen, 2002-present

Recent Journal Publications:

  • K. R. Uleck and A. J. Vizzini, “Fatigue Testing of Gr/Ep at Extreme Temperatures,” Journal of Composites Technology & Research, Vol. 25, No. 3, July 2003, pp. 179-184.
  • S. J. Ng, R. Boswell, S. J. Claus, F. Arnold, and A. Vizzini, “Degree of Cure, Heat of Reaction, and Viscosity of 8552 and 977-3 HM Epoxy Resins,” Journal of Advanced Materials, Vol. 34, No. 2, April 2002, pp. 33-37.
  • R. C. Moody, J. S. Harris, and A. J. Vizzini, “Scaling and Curvature Effects on the Damage Tolerance of Impacted Composite Sandwich Panels,” Journal of Sandwich Structures and Materials, Vol. 4, No. 1, January 2002, pp. 71-82.
  • C. D. MacDonald and A. J. Vizzini, “Response of Indented Sandwich Panels,” Journal of Thermoplastic Composite Materials, Vol. 15, No. 1, January 2002, pp. 33-42.
  • J. L. Knack and A. J. Vizzini, “Energy Absorption of Truncated Kevlar Epoxy Cones Under Off-Axis Loads,” Journal of Composites Technology and Research, Vol. 23, No. 4, October 2001, pp. 247-253.
  • M. T. Fenske and A. J. Vizzini, “The Inclusion of In-Plane Stresses in Delamination Criteria,” Journal of Composite Materials, Vol. 35, No. 15, 2001, pp. 1325-1342.
  • J. P. Hansen and A. J. Vizzini, “Fatigue Response of a Host Structure with Interlaced Embedded Devices,” Journal of Intelligent Materials, Systems, and Structures, Vol. 11, No. 11, 2001, pp. 902-909.
  • D. D. Dubey and A. J. Vizzini, “Testing Methods for Energy Absorption of Composite Materials,” Journal of the American Helicopter Society, Vol. 44, No. 3, 1999, pp. 179-187.
  • S. K. Kuczma and A. J. Vizzini, “Failure of Sandwich to Laminate Tapered Composite Structures,” AIAA Journal, Vol. 37, No. 2, 1999, pp. 227-231.

Recent Conference Proceedings:

  • C. S. Baldwin and A. J. Vizzini, “Acoustic Emission Crack Detection with FBG,” SPIE Conference, 2003.
  • S. Ng and A. J. Vizzini, “Mechanism of Marcel Formation in Thick Tapered Composites,” Proceedings of the 34th International SAMPE Technical Conference,” Baltimore, MD, November 2002, pp. 1168-1179.
  • Z.-H. Xie and A. J. Vizzini, “A Modified Analytical Model for Damage Propagation of a Low-velocity Impacted Sandwich Panel,” Proceedings of the American Society for Composites Seventeenth Technical Conference on Composite Materials, West Lafayette, IN, October 2002.
  • P. Valsgaard, A. J. Vizzini, and O. T. Thomsen, “Failure of Tapered Composite Beams Loaded in Torsion: Experimental Results,” Proceedings of the American Society for Composites Seventeenth Technical Conference on Composite Materials, West Lafayette, IN, October 2002.
  • K. R. Uleck and A. J. Vizzini, “Low-Cost UAV Airframe Manufacturing,” Proceedings of AUVSI's 29th Annual Symposium & Exhibition, July 2002.
  • K. R. Uleck and A. J. Vizzini, “A Low-Cost UAV System Using Commercial Technology,” Proceedings of AUVSI's 29th Annual Symposium & Exhibition, July 2002.
  • A. J. Vizzini, “Design and Manufacture of Composite Prototypes,” Proceedings of the AIAA/ASME/ASCE/AHS/ASC 43rd Structures, Structural Dynamics and Materials Conference, Denver, CO, April 2002.
  • F. Laurin and A. J. Vizzini, “Energy Absorption of Sandwich Panels with Composite Reinforced Foam Core,” Proceedings of the AIAA/ASME/ASCE/AHS/ASC 43rd Structures, Structural Dynamics and Materials Conference, Denver, CO, April 2002.
  • Z.-H. Xie and A. J. Vizzini, “The Presence of a Delamination in Damage Growth of an Impacted Sandwich Panel,” Proceedings of the American Society for Composites Sixteenth Technical Conference on Composite Materials, Blacksburg, VA, September 2001.
  • R. C. Moody and A. J. Vizzini, “Incorporation of a Compliance Change Due to Impact in the Prediction of Damge Growth in Sandwich Panels,” Proceedings of the 13th International Conference on Composite Materials, Beijing, China, June 2001.
  • K. M. Turner and A. J. Vizzini, “Response of Impacted Sandwich Panels with Integral Stiffeners,” Proceedings of the AIAA/ASME/ASCE/AHS/ASC 42nd Structures, Structural Dynamics and Materials Conference, Seattle, WA, April 2001, CD-ROM.
  • C. D. MacDonald and A. J. Vizzini, “Response of Indented Sandwich Panels,” Proceedings of the American Society for Composites Fifteenth Technical Conference on Composite Materials, College Station, TX, September 2000, pp. 275-281.
  • S. J. Ng, R. Boswell, S. J. Claus, F. Arnold, and A. Vizzini, “Degree of Cure, Heat of Reaction and Viscosity of HEXCEL 8552, 977-3 and E773 Resin,” Proceedings of the 45th SAMPE Symposium, Long Beach, CA, May 2000, pp. 1019-1028.
  • K. R. Uleck and A. J. Vizzini, “Incorporation of Temperature in Fatigue Models of PMC Laminates,” Proceedings of the AIAA/ASME/ASCE/AHS/ASC 41st Structures, Structural Dynamics and Materials Conference, Atlanta, GA, April 2000, CD-ROM, Paper #AIAA-2000-1369.
  • K. R. Uleck, M. J. Fox, A. J. Vizzini, E. J Friebele, H. J. Patrick, B. M. Wright, A. S. Greenblatt, and E. A. Bolden, “Reliability of Ultrahigh Sensitivity Optical Fiber Sensors Embedded in Graphite Composites,” Proceedings of SPIE, March 2000.
  • E. J. Friebele, H. J. Patrick, B. M. Wright, A. S. Greenblatt, E. A. Bolden, W. R. Simon, D. C. Giles, M. L. Stringfield, G. Hildago Jr., B. E. Catanzaro, M. Maher, K R. Uleck, M. J. Fox, and A. J. Vizzini, “Embedding and Testing of Ultrahigh Sensitivity Optical Fiber Sensors in Prototype Graphite Composite Spacecraft Strut Tubes,” Fiber Optic Sensor Technology and Applications, SPIE Vol. 3860, Boston, MA, September 1999, pp. 98-105.
  • R. C. Moody, J. S. Harris, and A. J. Vizzini, “Curvature Effects on the Damage Tolerance of Impact Damaged Composite Sandwich Panels,” Proceedings of the 12th International Conference on Composite Materials, Paris, France, July 1999, CD-ROM, Paper #663.
  • R. C. Moody, J. S. Harris, and A. J. Vizzini, “Width Effects on the Compression Strength of Composite Sandwich Structures after Barely Visible Impact Damage,” Proceedings of the AIAA/ASME/ASCE/AHS/ASC 40th Structures, Structural Dynamics and Materials Conference, St. Louis, MO, April 1999 pp. 1984-1992.

Honors and Awards:

  • Best Paper at the American Society for Composites 17th Technical Conference, October 2003.
  • Outstanding Teamwork Award, NASA Goddard Space Flight Center, May 2003.
  • Certificate of Teaching Excellence, University of Maryland, May 2003.
  • Technical Chair, 34th International SAMPE Technical Conference, November 2002.
  • Visiting Professor, Aalborg University, Institute for Mechanical Engineering, August-September 2002.
  • Professor of the Year, 1999-2000, University of Maryland AIAA and SG? Student Chapters, May 2000.
  • General and Technical Conference Chair, ASC 13th Technical Conference, October 1998.
  • James Clark School of Engineering Poole & Kent Company Teaching Award for Senior Faculty, University of Maryland, May 1998.
  • “Broken Propeller,” University of Maryland AIAA Student Chapter, May 1996.
  • Best Paper in the Interactive Plenary Session of the 36th AIAA Structures, Structural Dynamics, and Materials Conference, 1995.
  • Associate Fellow, American Institute of Aeronautics and Astronautics, 1994.

Editorialships:

  • Editorial Review Board, Journal of Advanced Materials, 2002-current.
  • Editorial Advisory Board, Journal of Composite Materials, 2001-2005.
  • Associate Editor, Journal of the American Helicopter Society, 1997-current.
  • Editorial Advisory Board, AIAA Education Series, member, 1998-2000.

Professional Memberships:

  • American Helicopter Society
  • American Institute of Aeronautics and Astronautics, Associate Fellow
  • American Society for Composites
  • American Society for Testing and Materials
  • Society for the Advancement of Material and Process Engineering
  • Sigma Xi, the Scientific Research Society

 


 
An ABET Accredited Program | Sitemap
Best Viewed with a resolution of 1024x768.
For Information about this site, email webmaster@ae.msstate.edu
Page URL: http://www.ae.msstate.edu/pages/vizzini.php
MSU is an Equal Opportunity Institution